QUIZ: Only a Handyman Can Name All of the Tools in This Quiz

Whether you’re handy around the house or you own a toolbox (or two), you should know the difference between a Phillips head screwdriver and a flathead screwdriver. But do you know which hammer to use to removing nails from wood? How about which tool to use to make sure shelves are level? If you know the answers to all of these questions, you’ll have no problem acing this tool quiz!

Whether you’re handy around the house or you own a toolbox (or two), you should know the difference between a Phillips head screwdriver and a flathead screwdriver. But do you know which hammer to use to removing nails from wood? How about which tool to use to make sure shelves are level? If you know the answers to all of these questions, you’ll have no problem acing this tool quiz!

What does a socket wrench do?

  • Seal pipes
  • Install electrical sockets
  • Tighten nuts
  • Open jars

Socket wrenches fit around hexagonal nuts to tighten them. These wrenches come in a variety of different sizes and and shapes to ensure that every nut can be tightened.

Socket wrenches fit around hexagonal nuts to tighten them. These wrenches come in a variety of different sizes and and shapes to ensure that every nut can be tightened.

What would you use to hold two pieces of wood together tightly?

  • Lever
  • C-clamp
  • Hammer
  • Wrench

C-clamps are used to clamp onto the edges of wood or plastic that is being cut, so it won’t move while it’s being worked on. Putting these clamps in place will help you avoid damaging the materials you’re working with.

C-clamps are used to clamp onto the edges of wood or plastic that is being cut, so it won’t move while it’s being worked on. Putting these clamps in place will help you avoid damaging the materials you’re working with.

What does this tool do?

  • Strip wires
  • Cut glass
  • Cut weeds
  • Remove staples

The notches on this tool can be used to strip different gages of wire by removing the outer plastic coating of the wire and revealing the inner metal wires.

The notches on this tool can be used to strip different gages of wire by removing the outer plastic coating of the wire and revealing the inner metal wires.

Which tool can be used to replace a hammer?

  • Chainsaw
  • Nail gun
  • A brick
  • Wrench

Nail guns come in many different varieties including battery powered, electric or fuel operated. There are also special nail guns made for siding, roofing and framing.

Nail guns come in many different varieties including battery powered, electric or fuel operated. There are also special nail guns made for siding, roofing and framing.

Which small tool can be used to score drywall?

  • Utility knife
  • Chainsaw
  • Pencil
  • Swiss Army knife

Utility knives can be used for other reasons on construction sites including cutting through linoleum flooring, cutting wallpaper and scoring drywall.

Utility knives can be used for other reasons on construction sites including cutting through linoleum flooring, cutting wallpaper and scoring drywall.

What should a wooden hammer be used for?

  • Anything you’d use a hammer for
  • Removing nails from drywall
  • Hammering nails
  • Tapping chisels

Wooden mallets are lightweight, unlike hammers, which are partially made out of metal. That means that wooden hammers aren’t sturdy enough to hammer nails into the wall.

Wooden mallets are lightweight, unlike hammers, which are partially made out of metal. That means that wooden hammers aren’t sturdy enough to hammer nails into the wall.

Which way should a screw with right-handed thread be turned to tighten it?

  • Left
  • Right
  • Upside down
  • Counter-clockwise

As the age old saying goes, righty-tighty, lefty-loosey! Most screws or knobs follow this rule, so it’s easy to remember. Technically, they can also be tightened by turning them clockwise.

As the age old saying goes, righty-tighty, lefty-loosey! Most screws or knobs follow this rule, so it’s easy to remember. Technically, they can also be tightened by turning them clockwise.

What is an EZ-Out used for?

  • Removing stripped screws
  • Holding onto pins
  • Removing clogs from pipes
  • Blowing sawdust off of tools

An EZ-Out is a screw extractor that can be used if a screw is too worn down after time and use to be extracted with a screwdriver. It works by gripping onto the screw itself to extract it.

An EZ-Out is a screw extractor that can be used if a screw is too worn down after time and use to be extracted with a screwdriver. It works by gripping onto the screw itself to extract it.

Which saw can best make curved cuts?

  • Chainsaw
  • Handsaw
  • Jigsaw
  • Circular saw

A jigsaw is a saw that uses a reciprocating blade to cut irregular curves in wood, metal or other materials.

A jigsaw is a saw that uses a reciprocating blade to cut irregular curves in wood, metal or other materials.

What is this antique tool called?

  • Sander
  • Wooden plane
  • Handsaw
  • Doorstop

A wooden plane or hand plane is a tool that can be used to shape wood. This one isn’t electrical, so it takes some brute strength to utilize the saw on this machine.

A wooden plane or hand plane is a tool that can be used to shape wood. This one isn’t electrical, so it takes some brute strength to utilize the saw on this machine.

What is the use of a miter saw?

  • To make rounded cuts
  • To make straight cuts
  • To make angled cuts
  • To mark wood

A miter saw can be adjusted to make angled cuts like what is needed to cut crown molding to fit corners. These precise cuts can turn an amateur job into a professional work of art.

A miter saw can be adjusted to make angled cuts like what is needed to cut crown molding to fit corners. These precise cuts can turn an amateur job into a professional work of art.

What is this tool called?

  • Tapered bit
  • Chalk
  • Level
  • Plumb bob

A plumb bob is used to mark objects to make sure that they are perfectly vertical, or plumb. The bob is suspended from a string and tools like it have been used since ancient Egypt.

A plumb bob is used to mark objects to make sure that they are perfectly vertical, or plumb. The bob is suspended from a string and tools like it have been used since ancient Egypt.

Which of these hammers is the most versatile?

  • Ball peen hammer
  • Tack hammer
  • Sledgehammer
  • Claw hammer

Claw hammers are used to both hammer nails into wood and remove nails using its curved claw.

Claw hammers are used to both hammer nails into wood and remove nails using its curved claw.

What does a feather board do?

  • Clean a table saw
  • Stabilize wood
  • Weigh pieces of wood
  • Tie knots

A feather board is a safety device that is used when working with stationary routers or power saws like bandsaws. It applies pressure against a piece of wood that is being worked on to keep it flat against a machine.

A feather board is a safety device that is used when working with stationary routers or power saws like bandsaws. It applies pressure against a piece of wood that is being worked on to keep it flat against a machine.

What is a hacksaw designed to cut?

  • Wood
  • Fabric
  • Metal
  • Food

Thanks to a hacksaw’s many small teeth, it can cut through metal. The equivalent saw for cutting through wood is called a bow saw.

Thanks to a hacksaw’s many small teeth, it can cut through metal. The equivalent saw for cutting through wood is called a bow saw.

What does this tool do?

  • Cut edges
  • Cut metal
  • Stabilize wood
  • Level wood

This tool is called a router and it is primarily used to hollow out an area in hard material, like wood or plastic. Routers are often used to make cabinets.

This tool is called a router and it is primarily used to hollow out an area in hard material, like wood or plastic. Routers are often used to make cabinets.

Which tool can make sure newly installed shelves are level?

  • Balloon level
  • Ruler
  • Bubble level
  • Plumb level

These bubble levels come in various shapes and sizes and can be used on any project that needs to be flat, like making shelving, hanging paintings and installing windows.

These bubble levels come in various shapes and sizes and can be used on any project that needs to be flat, like making shelving, hanging paintings and installing windows.

What does this tool do?

  • Drill nails into drywall
  • Drill screws into concrete
  • Cut linoleum
  • Cut wood

A condrive tool is used to drive screws into concrete. The drill section makes a pilot hole and the driver positions and sets the screw to avoid splitting the concrete.

A condrive tool is used to drive screws into concrete. The drill section makes a pilot hole and the driver positions and sets the screw to avoid splitting the concrete.

This tool spins to create a symmetrical object, what is it called?

  • Saw
  • Lathe
  • Grinder
  • Sander

Wood lathes are used to make a variety of objects, such as table legs, doorknobs, bowls and cups, and anything that can be sanded down into an intricate, symmetrical design.

Wood lathes are used to make a variety of objects, such as table legs, doorknobs, bowls and cups, and anything that can be sanded down into an intricate, symmetrical design.

What does the tip of a Phillips head screwdriver resemble?

  • A line
  • An X
  • A square
  • A circle

Phillips head screwdrivers were named after their inventor, Henry F. Phillips. They are x shaped while flat head or slotted screwdrivers, which are more common, are line shaped.

Phillips head screwdrivers were named after their inventor, Henry F. Phillips. They are x shaped while flat head or slotted screwdrivers, which are more common, are line shaped.

This tool is powered by pressurized air:

  • Aerodynamic tool
  • Electric tool
  • Manual tool
  • Pneumatic tool

Common types of air-powered hand tools that are used in carpentry are buffers, nailing and stapling guns, drills, jack hammers and chipping hammers.

Common types of air-powered hand tools that are used in carpentry are buffers, nailing and stapling guns, drills, jack hammers and chipping hammers.

What does the tool in this photo do?

  • Check levels
  • Set blade heights
  • Find depths
  • All of the above

This tool set has three different attachments that can be used for leveling, making patterns and setting up tools for precision work.

This tool set has three different attachments that can be used for leveling, making patterns and setting up tools for precision work.

When is a nail set used?

  • To hammer nails into drywall
  • To sink a nail below the surface of wood
  • To install in a nail gun
  • To repair a broken nail

A nail set is a small tool that allows you to hammer a nail flush or beneath the surface of wood while keeping the hammerhead a safe distance away from the wood itself, as not to cause dents.

A nail set is a small tool that allows you to hammer a nail flush or beneath the surface of wood while keeping the hammerhead a safe distance away from the wood itself, as not to cause dents.

What can a Forstner bit do?

  • Make holes in metal
  • Sand raw materials
  • Make holes in wood
  • Polish rocks

Forstner bits have a wide outer edge to drill large or medium sized holes in wood that have clean and smooth edges. It’s common to use this bit when making doors or cabinets that will be outfitted with handles.

Forstner bits have a wide outer edge to drill large or medium sized holes in wood that have clean and smooth edges. It’s common to use this bit when making doors or cabinets that will be outfitted with handles.

What does this tool do?

  • Tighten screws
  • Cut wires
  • Fix gaps
  • Repair cuts

This tool is a spark plug gap gauge, which is used to set the right amount of gaps between electrodes. This tool is used primarily in car repair to ensure that your spark plugs fire efficiently.

This tool is a spark plug gap gauge, which is used to set the right amount of gaps between electrodes. This tool is used primarily in car repair to ensure that your spark plugs fire efficiently.

Which tool can be used to tighten a hexagonal bolt?

  • A hammer
  • A wrench
  • A chisel
  • A drill bit

Wrenches, which can be found in just about every tool kit are used to tighten bolts by wrapping around the head of the bolt and twisting right. Wrenches can also be used to tighten washers on top of bolts.

Wrenches, which can be found in just about every tool kit are used to tighten bolts by wrapping around the head of the bolt and twisting right. Wrenches can also be used to tighten washers on top of bolts.

What can chisels be used for in woodworking?

  • Shaping wood
  • Smoothing tools
  • Leveling
  • Securing planks

Chisels are used to scrape away layers of wood to create recesses to be used later. These recesses may later be filled by hinges, dadoes or other pieces of wood.

Chisels are used to scrape away layers of wood to create recesses to be used later. These recesses may later be filled by hinges, dadoes or other pieces of wood.

What is the other name for a Phillips head screwdriver?

  • X face
  • Cross head
  • Old driver
  • Martin’s head

Phillips head screwdrivers are also called cross-head screwdrivers, because their shape resembles an X or a cross.

Phillips head screwdrivers are also called cross-head screwdrivers, because their shape resembles an X or a cross.

Which material does this tool work with?

  • Metal
  • Screens
  • Wood
  • Brick

This tool is called a screen taller and it can be used for professional or home use. The wheel sets metal screening into a frame and helps installs a rubber spine to keep the screen in place.

This tool is called a screen taller and it can be used for professional or home use. The wheel sets metal screening into a frame and helps installs a rubber spine to keep the screen in place.

Which tool uses a circular blade to make cuts at an angle?

  • Miter saw
  • Chainsaw
  • Drill saw
  • Cut saw

A miter saw can be used to cut angels, moldings and even repetitive cross cuts. The saw’s blade is mounted on a swing arm that can pivot to produce angled cuts.

A miter saw can be used to cut angels, moldings and even repetitive cross cuts. The saw’s blade is mounted on a swing arm that can pivot to produce angled cuts.

How should a crosscut saw be used?

  • Against the grain
  • With the grain
  • After sanding the wood
  • After finishing the wood

Crosscut saws have teeth cut in both directions, so they are used to make fine cuts against the grain of wood. Whether you’re pushing or pulling the saw, it will be able to make a clean cut.

Crosscut saws have teeth cut in both directions, so they are used to make fine cuts against the grain of wood. Whether you’re pushing or pulling the saw, it will be able to make a clean cut.

What are these tools called?

  • Monkey wrenches
  • Screwdrivers
  • Allen keys
  • Compasses

The name of Allen keys come from their source, the Allen Manufacturing Company of Hartford, Connecticut. They are used to drive bolts and screws with hexagonal sockets.

The name of Allen keys come from their source, the Allen Manufacturing Company of Hartford, Connecticut. They are used to drive bolts and screws with hexagonal sockets.

What is this tool called?

  • Electricity hose
  • Tape deck
  • Fish tape
  • Wire wheel

A fish tape is long, thin, flat steel wire that is wound up inside of a donut-shaped wheel. It is used by electricians to route new wiring through walls.

A fish tape is long, thin, flat steel wire that is wound up inside of a donut-shaped wheel. It is used by electricians to route new wiring through walls.

What is this chisel used for?

  • Chipping away wood
  • Breaking cement
  • Scraping tape off of glass
  • Cutting glass

Also called a dog’s leg chisel, this tool is used to cut away wood in hard to reach areas of a project. Its sharp edge is strong enough to remove very small areas of wood without causing major damage to a piece.

Also called a dog’s leg chisel, this tool is used to cut away wood in hard to reach areas of a project. Its sharp edge is strong enough to remove very small areas of wood without causing major damage to a piece.

What is this tool used for?

  • Hammering nails
  • Finding studs
  • Removing staples
  • Stripping coaxial cables

This tool is a coaxial stripper, which strips coaxial cables from their outer plastic coating, much like more common wire strippers.

This tool is a coaxial stripper, which strips coaxial cables from their outer plastic coating, much like more common wire strippers.

What is this tool used for?

  • Finding studs
  • Joining wood
  • Sanding
  • Securing tools

This tool is a traditional Kreg jig, which drills holes known as pocket holes, allowing screws to be inserted at an angle. Because the screw runs along the grain, it will be stronger and more secure.

This tool is a traditional Kreg jig, which drills holes known as pocket holes, allowing screws to be inserted at an angle. Because the screw runs along the grain, it will be stronger and more secure.

What was a ball peen hammer traditionally used to do?

  • Tighten screws
  • Bending metal
  • Securing hex nuts
  • Medical exams

Ball peen hammers have two-sided heads, one of which is used to drive nails into wood and the other of which is round and used for working with metal or driving rivets by hand.

Ball peen hammers have two-sided heads, one of which is used to drive nails into wood and the other of which is round and used for working with metal or driving rivets by hand.

What is this tool used for?

  • Metalworking
  • Tightening screws
  • Installing eyeholes
  • Making holes

This wing nut/bolt driver is typically used to install eyeholes in ceilings. First, the eye bolt is set into a ceiling joist. Then wire is connected to the bolts and then to the secured frame.

This wing nut/bolt driver is typically used to install eyeholes in ceilings. First, the eye bolt is set into a ceiling joist. Then wire is connected to the bolts and then to the secured frame.

What is this tool used for?

  • To cut and join wood
  • To cut edges
  • To carve intricate designs
  • To sand wood

This tool, called a biscuit joiner, is primarily used to cut and join multiple pieces of wood together. The tool makes a slot into which glue can be inserted to make a bond.

This tool, called a biscuit joiner, is primarily used to cut and join multiple pieces of wood together. The tool makes a slot into which glue can be inserted to make a bond.

What is this tool called?

  • Hex nut
  • Wing bolt
  • Coaxial stripper
  • Mullion clamp

Coaxial strippers are used to remove the outer layer of plastic insulation from wires while working with electronics. Similar to wire strippers, these tools come in many shapes and sizes.

Coaxial strippers are used to remove the outer layer of plastic insulation from wires while working with electronics. Similar to wire strippers, these tools come in many shapes and sizes.

You've scored 4/40 correct answers!

Did you enjoy this quiz? Here are some more suggestions for you:

Complete This Quiz and it Will Choose a Famous Personality from History

Some of the greatest human minds in recent history have included Bill Gates, Albert Einstein and Steven Hawking, and some…

QUIZ: Can You Name These Sitcoms From Just an Image of Their Empty Sets?

TV sitcoms have been a source of laughter in many homes throughout the world, and a lot of fans swear…

Which of Henry VIII’s Wives Are You Most Like?

Henry VIII is one of the most married monarchs in history and the sight or sound of his name immediately…

QUIZ: Only Jedis Have the “Star Wars” Knowledge Needed to Pass this Quiz!

With the release of the first "Star Wars" film in 1977 came a world full of fantasy, heroes and villains,…